Extra equipment  ›  SERCO - Infra and environment care products

SERCO Pump D-16/014 (with hydr. motor)
602696

Serco centrifugal pump D-16/014 with hydraulic motor

 
The Serco centrifugal pump D-16/014 is the most powerful model of all our hydraulically operated pumps. The Serco D-16/014 is suited for washing, watering and transferring fluids e.g. between transport and storage tanks. However, thanks to its 1,000 L/min output and 8 bar pressure, this pump is best suited to provide pressure for high-pressure washers and hose reels.
The Serco D-16/014 pump does not have a suction feature as standard. Suction can be provided using a separate primer. Ask for more information about the primer if you need to fill tanks from e.g. rivers or lakes using the Serco D-16/014.

 
As standard, the suction hole of the pump has a 2-1/2” inside thread and the pressure side a 2” inside thread. Select the required couplings for the pump from the section “Other washing products”. A second pressure connection can be added to the pump, but in standard delivery it has been covered.





* = pakollinen tieto täyttää

Serco centrifugal pump D-16/014 with hydraulic motor

 
Technical data:

 
- Max. pressure 8 bar (attained with 26 kW power, hydraulic oil requirement 64 L/min and about 270 bar)
- Max. output 1,000 L7min (attained with 26 kW power, hydraulic oil requirement 64 L/min and about 270 bar)
Pump material is aluminium.
Pump weight ca. 40 kg
- Suction side 2-1/2” pipe thread (inside thread)
- Pressure side 2” pipe thread (inside thread)

 
Hydraulic requirements:

 
- Hydraulic oil flow 64 L/min (max. output)
- Hydraulic oil pressure 270 bar (maximum output)
- Mechanical flow control valve (max. input 100 L/min)
- Three hydraulic hoses (pressure and return 3/4” hose, free tank line 3/8” hose)

 
NOTE!

 
The free tank line must not be connected to the pump return line. It has to be a separate line to the hydraulic oil tank!